CAPFEICOFFEETOOLS
54mm Espresso Tamper with Calibrated Spring Loaded for Ninja Luxe Café/Breville -【24lb~35lbs Self-Adjustable with Sound Feedback】- Self Leveling Stainless Steel Ripple Base - Black
54mm Espresso Tamper with Calibrated Spring Loaded for Ninja Luxe Café/Breville -【24lb~35lbs Self-Adjustable with Sound Feedback】- Self Leveling Stainless Steel Ripple Base - Black
Couldn't load pickup availability
About This
- 【Self-Adjustable Tamping Pressure】There is a built-in 24-35 pound impact regulating valve with special screws inside the CAPFEI 54mm Tamper.
- 【Sound Feedback】There's a solid "click" when you hit the tamping pressure you set, then the base will squeeze the puck again to reduce the gap between the powder puck and eliminate the channelling problem. After the tamping is completed, it will automatically reset without adjustment.
- 【Stainless Steel Ripple Base】 Allows the water to be distributed more evenly as it passes through the coffee grounds so that a better coffee can be made.
- 【Horizontal Tamping】 The ring above the base ensures that the tamping pressure on the puck is even.
- 【Fits Ninja Luxe Café/Breville 54mm Portafilters】 The espresso tamper base diameter is 53.35mm, which fit Ninja Luxe Café, Breville Barista Express, Pro, Touch, Bambino Plus, Infuser, and Duo-Temp Pro.
Share
The tamper worked well for a few months with time it has started to slowly disassemble itself after each tamp the spring loaded tamping head unscrews from the rest of the tamper until it eventually completely disassembles itself and the springs go flying everywhere.
After a few months of use, it started wabbling when tamping, causing my puck to be tamped with 25-degree slop.
a great pressurized tamp. the only issue is it makes a big bang noise when tamping so when i make coffee in the morning it is loud enough to wake people up.
This tamper has made the perfect upgrade to the breville espresso process in the morning. No need to think about the force that you use, keeps things clean, simple, and is easy to adjust
The tamper worked well for a couple months with time it has started to slowly disassemble itself after each tamp the spring loaded tamping head unscrews from the rest of the tamper until it eventually completely disassembles itself and the springs go flying everywhere, it can be reassembled and it works for a period of time again but it’s not long before it self destructs once more